6 Way Symbol Cluster CAN
The 6 Way Symbol Cluster CAN is a cluster with individually configurable front-end-design developed by Würth Elektronik ICS. This product offers 6 LED indicators being controlled by CAN bus. It also provide 1 digital input and 1 digital sinking output which can, as well, be controlled from CAN bus. Customer-specific symbols and colors can be easily implemented.
Applications
- Add-on features indicators
- Standard symbol cluster based on CAN communication
- Vehicle functions visualization
General Information | |
---|---|
Connector | Micro Fit 6 Ways MPC3 |
Dimensions | 24 x 97 x 20 mm |
Weight | 21 g |
Operating temperature | -30 °C to 80 °C |
Storage temperature | -40 °C to 85 °C |
Ingress protection | Front face IP54 / rear IP00 |
Operating voltage | 8 V to 32 VDC |
Pre-fusing | 1A (recommended) |
Current consumption (max) |
All LEDs off: 25 mA All LEDs on: 100 mA |
Controller type | Automotive |
CAN Bus Interfaces | |
---|---|
acc. ISO 11898-2 | High speed |
acc. CAN 2.0B | 29 Bits extended address identifier |
acc. CAN 2.0A | 11 Bits address identifier |
Reserved IDs (UDS) | 0x7DF, 0x7E0 & 0x7E8 (configurable) |
Baud rate |
100 / 125 / 250 / 500 / 1000 kbps default setting : 500kbps |
Inputs & Outputs Overview | ||
---|---|---|
1 | Digital inputs | Digital input high active |
1 | Digital inputs | Analogue input for measuring supply voltage |
1 | Digital inputs | Low side output |
Inputs / Outputs Details | |
---|---|
Digital Input | |
Input voltage |
up to Vsupply |
Switch-on level |
> 7,5 VDC |
Switch-off level |
< 4 VDC |
Input resistance |
> 60.00 kΩ |
Vsupply measurement | |
Voltage range | 0-33 V (see op. volt.) |
Digital output | Low Side |
Load current | Max 2 W / 150 mA |
ON rest voltage |
1.1 VDC Reverse polarity protected |
LED Dimming | |
PWM frequency | 1 kHz |
Duty cycle | 10 to 90 % |
Adjustment steps | 10% |
Features und configuration tool
With the help of our WE Flasher Tool you can configure your 6 Way Symbol Cluster CAN. Following features are available in the standard application:
Configurable features | |
---|---|
Boot up behavior | All LED’s get turned on for 2 seconds, or there is no activation at startup. |
CAN timeout handler |
Either not activated (the device keeps the last received orders), or it is based on CAN traffic (specific / global). On lost of CAN the LEDs are either turned off, or they are flashing with a 2 Hz frequency. Timeout time can be set up to 65 seconds. |
Supply voltage | The value of the supply voltage can be sent on the CAN bus over 2 bytes. This feature can be activated on a configurable frame and byte position, or deactivated. |
Digital input broadcast | The status can either be broadcasted over a configurable CAN frame or not sent at all. |
LED dimming | One LED dimming value can be set between 10 and 90 % and activated through a CAN command. |
LED activation | Each LED can be activated through a configurable CAN message, where the digital information can be set independently (independent frame for every LED possible). |
All digital CAN information are based on the J1939 2 bits logic (00 : Off, 01 : On, 10 and 11 : N/A or do nothing) |
Pin | Description | Function |
---|---|---|
1 | KL30 | Power supply 8 – 32V |
2 | GND | Ground |
3 | CAN L | CAN low |
4 | Dig Out | Open drain output 150mA / 2 W |
5 | Dig In | Digital input |
6 | CAN H | CAN Hight |
Project procedure
- Project description: define all relevant project features. Ask us for a template which will help you to define them.
- Project configuration: generate your configuration file and test it directly on your sample using our configuration tool, which is embedded in WE Flasher tool.
- Foil and icons creation: The 6 Way Symbol Cluster CAN is based on white LED enlighting a colored foil. The icons and colors can be defined individually based on your drawings or on our icon library.
Mating connectors | Würth Elektronik eiSos Part Number |
---|---|
6 pins WR-MPC3 3.00 mm Female Dual Row Receptacle | 662006113322 |
WR-MPC3 3.00 mm Female Crimp Contact AWG 20 - 24 |
66200113722 |
WR-MPC3 3.00 mm Female Crimp Contact AWG 26 - 30 |
66200413722 |
For 100 pieces packages, please add "DEC" at the end of the reference. |